Film Installation Agreement

Last updated: 2026-09-04

Choosing Film Type & Shade

Our technicians will gladly recommend film types and shades, but the final decision rests with you, the Client. If you select a film darker than the legal limit and receive a citation, responsibility lies solely with you. Once the material has been cut, any change of film type or shade will incur additional charges beyond the original quotation.

Deposit & Invoices

Invoices — FIRST IN FILM WINDOW TINT will issue an invoice before completion of the project unless otherwise noted in the payment schedule. The Client agrees to pay all invoices by the stated due date. Unpaid or overdue invoices may result in suspension or termination of the project.

Deposit — A non-refundable deposit is required to secure an appointment unless written cancellation or rescheduling notice is received at least forty-eight (48) hours in advance.

Payment Methods

Payment may be made by cash, an approved payment card, or any other method accepted by FIRST IN FILM WINDOW TINT.

No Refunds

Once window-film installation has begun — or once the project is completed — no refunds will be issued. Film quality and installation workmanship are deemed acceptable when released by the Owner of FIRST IN FILM WINDOW TINT.

The Client agrees to inspect the vehicle before making final payment and accepting the keys. Final payment constitutes an official release of FIRST IN FILM WINDOW TINT from further responsibility for the serviced vehicle. If the Client picks up the vehicle outside normal business hours, final payment is deemed acknowledgement that the work is satisfactory.

Imperfections

Some dust or lint may become trapped between the film and glass; this will not affect adhesion or performance. Even in a controlled environment a 100% dust-free installation cannot be guaranteed.

Per IWFA guidelines, film is inspected from the room side at a distance of six (6) feet under natural daylight. Installation is acceptable if, during the 30- to 60-day curing period, the following are unobtrusive:

Dirt or dust particles
Hair or fibers
Adhesive gels
Fingerprints
Minor air bubbles or water haze
Light scores or scratches
Slight optical distortion, creases, edge lifting, nicks, or tears

If any of these conditions persist after 30–60 days, the Client must present the vehicle at our facility for evaluation. Inspections cannot be performed by phone, email, or photographs.

Viewing Standard — Once installed, window film is intended to be viewed from a distance of six (6) feet; variations within this standard are acceptable.

Warranties

FIRST IN FILM WINDOW TINT provides the Client with the applicable manufacturer's warranty. Warranties are non-transferable and cover cracking, peeling, bubbling, and fading (≤ 25% over the warranty period is considered normal). Defective film will be replaced at no cost to the original purchaser; if the original product is unavailable, a comparable or superior film will be supplied.

Warranty coverage excludes scratches, nicks, tears, and damage caused by faulty vehicle equipment or customer abuse. Seat-belt nicks and plastic-gasket abrasions are particularly common and are not covered.

Windshield Film Installation

Contamination Disclaimer — Although reasonable precautions are taken, a completely contamination-free windshield install cannot be guaranteed. Minor micro-creases resulting from the handling of large film pieces are possible and do not affect performance.

Risk to Electronic Components — Water may come into contact with electronics behind the dashboard despite protective measures. The Client accepts this risk and releases FIRST IN FILM WINDOW TINT from liability for related repairs.

Prohibited Attachments — Do not affix suction cups, stickers, or similar devices (e.g., radar detectors, phone mounts, GPS units) directly to the film. Damage resulting from such attachments is deemed customer-caused and voids the warranty.

Curing Process — Moisture trapped between film and glass is normal and will evaporate as the adhesive cures.

Expected Duration — Full curing may take several days to a few weeks, depending on temperature and humidity.

Tint Removal

Professional film removal is performed with specialized steamers and adhesive-removal techniques. Removal can damage defroster lines, antennas, or glass. The Client releases FIRST IN FILM WINDOW TINT from liability for damage that may occur during tint removal.

Card-on-File Authorization

The Client authorizes FIRST IN FILM WINDOW TINT to retain credit/debit-card or bank information for future transactions until the Client requests removal in writing. FIRST IN FILM WINDOW TINT may charge the card for any remaining balance upon service completion.

Licensing

FIRST IN FILM WINDOW TINT affirms that it holds all licenses required to perform the work and that all services will comply with applicable federal, state, and local laws and regulations.

Modifications

Any change to this contract must be made in writing and signed by both the Client and FIRST IN FILM WINDOW TINT.

Authority to Sign

Each party warrants that it has full authority to enter into this Agreement and to perform all obligations stated herein.